Asus M5A88-V EVO Specifications download pdf (Page 30)

2-12 Chapter 2: Hardware information

Chapter 2

2.4.3 Installing a DIMM

Ensure to unplug the power supply before adding or removing DIMMs or other system

components. Failure to do so may cause severe damage to both the motherboard and the

components.

2.4.4 Removing a DIMM

1. Simultaneously press the retaining

clip outward to unlock the DIMM.

3. Hold the DIMM by both of its ends,

then insert the DIMM vertically into

the socket. Apply force to both ends

of the DIMM simultaneously until the

retaining clip snaps back into place,

and the DIMM cannot be pushed in

any further to ensure proper sitting of

the DIMM.

1. Unlock a DIMM socket by pressing

the retaining clips outward.

2. Align a DIMM on the socket such that

the notch on the DIMM matches the

DIMM slot key on the socket.

A DIMM is keyed with a notch so that it ts in only one direction. DO NOT force a DIMM into

a socket in the wrong direction to avoid damaging the DIMM.

Locked Retaining Clip

Always insert the DIMM into the socket VERTICALLY to prevent DIMM notch damage.

Unlocked retaining clip

DIMM notch

DIMM slot key

Support the DIMM lightly with

your ngers when pressing the

retaining clips. The DIMM might

get damaged when it ips out with

extra force.

2. Remove the DIMM from the socket.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 123 124

No comments

Asus M5A88-V EVO Specifications Page 30