Asus M5A88-V EVO Specifications Page 74

  • Download
  • Add to my manuals
  • Print
  • Page
    / 124
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 73
3-18 Chapter 3: BIOS setup
Chapter 3
3.5.6 HT Link Speed [Auto]
Allows you to select the HyperTransport link speed. Conguration options: [Auto] [200MHz]
[400MHz] [600MHz] [800MHz] [1000MHz] [1200MHz] [1400MHz] [1600MHz] [1800MHz]
[2000MHz]
3.5.7 GPU Booster [Enabled]
[Enabled] Select [Enabled] to automatically optimize the iGPU frequency.
[Disabled] Select [Disabled] to use a xed iGPU frequency.
Enhanced iGPU SpeedStep [Auto]
This item appears only when you set the GPU Booster item to [Enabled] and allows you to
set the iGPU clock speed for better 3D performance. Conguration options: [Auto] [Turbo]
[Extreme] [Manual]
GPU Engine Clock [700]
This item appears only when you set the GPU Booster item to [Disabled] or set the
Enhanced iGPU SpeedStep item to [Manual]. Allows you to set the GPU Engine
Clock. Use the <+> and <-> keys to adjust the value. You can also key in the desired
value using the numeric keypad. The values range from 200MHz to 2000MHz.
GPU Power Saving Mode [Enabled]
This item appears only when you set the GPU Booster item to [Enabled].
[Enabled] Select [Enabled] to reduce the iGPU power consumption when the system
is idle.
[Disabled] Disables this function.
3.5.8 OC Tuner Utility
OC Tuner utility automatically overclocks the frequency and voltage of the CPU and DRAM.
Press <Enter> to start auto tuning. It takes around ve minutes, and the system will reboot for
several times until auto tuning is completed.
3.5.9 DRAM Timing Conguration
The conguration options for some of the following items vary depending on the DIMMs
you install on the motherboard.
DRAM CAS# Latency [Auto]
Conguration options: [Auto] [4 CLK] ~ [12 CLK]
DRAM RAS# to CAS# Delay [Auto]
Conguration options: [Auto] [5 CLK] ~ [12 CLK]
DRAM RAS# PRE Time [Auto]
Conguration options: [Auto] [5 CLK] ~ [12 CLK]
Page view 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 123 124

Comments to this Manuals

No comments