Asus SABERTOOTHZ87 User Manual download pdf (Page 81)

ASUS SABERTOOTH Z87

3-15

Chapter 3

MISC

MRC Fast Boot [Auto]

Allows you to enable, disable or automatically set the MRC fast boot.

Conguration options: [Auto] [Enable] [Disable]

DRAM CLK Period [Auto]

Conguration options: [Auto] [1] – [14]

Channel A/B DIMM Control [Enable Bot...]

Conguration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1]

[Disable Both DIMMS]

Scrambler Setting [Optimized ...]

Allows you to set the optimized scrambler setting for stability.

Conguration options: [Optimized (ASUS] [Default (MRC)]

DIGI+ Power Control

CPU Load-Line Calibration [Auto]

Load-line is dened by Intel

VRM specication and affects CPU power voltage. The

CPU working voltage will decrease proportionally to CPU loading. Higher load-line

calibration could get higher voltage and good overclocking performance, but increases

the CPU and VRM thermal conditions.

Select from Level 1 to Level 8 to adjust CPU power voltage from 0% to 100%.

The actual performance boost may vary depending on your CPU specication.

DO NOT remove the thermal module. The thermal conditions should be monitored.

CPU Voltage Frequency [Auto]

Frequency switching affects the VRM transient response and the thermal component

conditions. Higher frequency gets quicker transient response.

Conguration options: [Auto] [Manual]

DO NOT remove the thermal module when setting this item to [Manual Mode]. The thermal

conditions should be monitored.

The following item appears only when you set the CPU Voltage Frequency to [Manual].

CPU Fixed Frequency [300]

This item allows you to set a xed CPU Voltage frequency. Use the <+> or

<-> keys to adjust the value. The values range from 300kHz to 500kHz with

a 50kHz interval.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 165 166

No comments

Asus SABERTOOTHZ87 User Manual Page 81