Asus SABERTOOTHZ87 User Manual download pdf (Page 85)

ASUS SABERTOOTH Z87

3-19

Chapter 3

Power Decay Mode [Auto]

Allows your system to improve the power saving mode on the Fully Integrated Voltage

Regulator as the processor goes into low current state.

Conguration options: [Auto] [Disabled] [Enabled]

Idle Power-in Response [Auto]

Allows you to set the slew rate for the Fully Integrated Voltage Regulator as it enters

manual override mode.

Conguration options: [Auto] [Regular] [Fast]

Idle Power-out Response [Auto]

Allows you to set the slew rate for the Fully Integrated Voltage Regulator as it exits

manual override mode.

Conguration options: [Auto] [Regular] [Fast]

Power Current Slope [Auto]

Allows you to set the gradient of the high-speed active phase current balance during

load transients to eliminate current imbalance that can result from a load current

oscillating near the switching frequency.

Conguration options: [Auto] [LEVEL -4] - [LEVEL 4]

Power Current Offset [Auto]

Allows you to increase or decrease the output current sensed by the CPU. It nds the

balance between optimal regulating while staying below the current threshold.

Conguration options: [Auto] [100%] [87.5%] [75.0%] [62.5%] [50.0%] [37.5%] [25.0%]

[12.5%] [0%] [-12.5%] [-25.0%] [-37.5%] [-50.0%] [-62.5%] [-75.0%] [-87.5%] [-100%]

Power Fast Ramp Response [Auto]

Allows you to increase to enhance the response of the voltage regulator during the

load transient.

Conguration options: [Auto] [0.00] - [1.50]

CPU Internal Power Saving Control

Power Saving Level 1 Threshold [Auto]

Lower value provides sufcient overclocking tolerance to enlarge the overclocking

potential. Higher value provides better power-saving condition.Use <+> or <-> key to

adjust the value. The values range from 0A to 80A at 1Amp increment.

Power Saving Level 2 Threshold [Auto]

Lower value provides sufcient overclocking tolerance to enlarge the overclocking

potential. Higher value provides better power-saving condition.Use <+> or <-> key to

adjust the value. The values range from 0A to 50A at 1Amp increment.

Power Saving Level 3 Threshold [Auto]

Lower value provides sufcient overclocking tolerance to enlarge the overclocking

potential. Higher value provides better power-saving condition.Use <+> or <-> key to

adjust the value. The values range from 0A to 30A at 1Amp increment.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 165 166

No comments

Asus SABERTOOTHZ87 User Manual Page 85