4. Troubleshooting
48 ASUS 802.11g Access Point
Chapter 4 -Troubleshooting
The ASUS 802.11g AP is not
accessible.
If the ASUS 802.11g AP is not
accessible, restore it to its factory
default settings. Use a pen or paper
clip to press the Reset button at the
rear panel for over ve seconds. The
power LED lights up when the AP is
successfully restored to its factory
default settings.
The following settings are the factory default settings of the ASUS 802.11g AP.
Name Default Value
Wireless - Interface
SSID default
Channel 6
Encryption (WEP) None
Broadcast SSID No
Wireless - Bridge
AP Mode Access Point Only
Wireless - Access Control
MAC Access Mode Disabled
IP Cong - LAN
IP Address 192.168.1.1
Get IP Address Automatically Yes
Subnet Mask 255.255.255.0
Gateway (blank)
System Setup - Password
Operation Mode Access Point
User Name admin
Password admin
Comments to this Manuals