Asus P5QL-I/SI User Manual download pdf (Page 28)

ASUS P5QL-I/SI 2-3

• Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and

press <Enter> to enable it.

Press <Tab> to switch between drives until the correct BIOS le is found.

2. When the correct BIOS le is found, EZ Flash 2 performs the BIOS update process

and automatically reboots the system when done.

2.1.3 ASUS CrashFree BIOS 3 utility

The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS le

when it fails or gets corrupted during the updating process. You can update a corrupted BIOS

le using the motherboard support CD or a USB ash disk that contains the updated BIOS

le.

• Prepare the motherboard support CD or the USB ash disk containing the updated

motherboard BIOS before using this utility.

• Always connect the SATA cables to the SATA1-4 connectors. Otherwise, the utility will

not function.

Bad BIOS checksum. Starting BIOS recovery...

Checking for CD-ROM...

CD-ROM not found!

Checking for USB Device...

Recovering the BIOS

To recover the BIOS:

1. Turn on the system.

2. Insert the support CD or USB ash disk containing the BIOS le to the optical drive or

USB port.

3. The utility displays the following message and automatically checks the support CD or

USB ash disk for the BIOS le.

When found, the utility reads the BIOS le and starts erasing the corrupted BIOS le.

Bad BIOS checksum. Starting BIOS recovery...

Checking for USB Device...

USB Device found.

Reading le “P5QLI.ROM”. Completed.

Start Erasing...\

• Only a USB ash disk with FAT 32/16 format and single partition can support the ASUS

EZ Flash 2 utility.

• Do not shut down or reset the system while updating the BIOS to prevent system boot

failure!

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 39 40

No comments

Asus P5QL-I/SI User Manual Page 28