ASUS KFN4-DRE 5-7
5.2.4 Rebuilding a RAID set
To rebuild a RAID set:
1. From the Array List, use the up or down arrow keys to select the RAID
set you want to rebuild, then press <Enter>. The RAID set details
appear.
2. Press <R>.
3. Use the up or down arrow keys to select a the RAID set you want to
rebuild, then press <F7>. A conrmation message appears.
4. Press <Enter> to start rebuilding the array,
or <Esc> to cancel. The Array List screen
displays the RAID set after rebuilding.
Rebuild array?
[Enter]OK[Esc]Cancel
[Ctrl-X]Exit[↑↓]Select[B]SetBoot[N]NewArray[ENTER]Detail
Media Shield Utility
- Array List -
Boot Id Status Vendor Array Model Name
No 4 Healthy NVIDIA STRIPING XXX.XXG
No 3 Healthy NVIDIA MIRRORING XXX.XXG
[↑↓]Select[F6]Back[F7]Finish
Array 1 : NVIDIA MIRROR XXX.XXG
- Array Detail -
RAID Mode: Mirroring
Striping Width: 1 Striping Block: 64K
AdaptChannelM/SIndexDiskModelNameCapacity
2 1 Master 0 XXXXXXXXXXXXXXXXX XXX.XXGB
1 0 Master 1 XXXXXXXXXXXXXXXXX XXX.XXGB
Comments to this Manuals