4-26 Chapter 4: BIOS setup
V00.00(C)Copyright1985-2004,AmericanMegatrends,Inc.
BIOS SETUP UTILITY
Advanced
PeripheralDevicesConguration
OnBoardFloppyController [Enabled]
SerialPort1Address [3F8/IRQ4]
SerialPort2Address [2F8/IRQ3]
SerialPort2Address [Normal]
ParallelPortAddress [Disabled]
→← Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 SaveandExit
ESC Exit
4.4.5 Peripheral Devices Configuration
OnBoard Floppy Controller [Enabled]
Enables or disables the onboard oppy controller.
Conguration options: [Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Conguration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]
Serial Port2 Address [2F8/IRQ3]
Allows you to select the Serial Port2 base address.
Conguration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Serial Port 2 Mode [Normal]
Sets the serial port 2 mode.
Conguration options: [Normal] [IrDA] [ASK IR]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Conguration options: [Disabled] [378] [278] [3BC]
The following item appears when the Parallel Port Address is set to 378,
278, or 3BC.
Parallel Port Mode [Normal]
Allows you to select the Parallel Port mode. Conguration options:
[Normal] [Bi-directional] [ECP] [EPP] [ECP & EPP]
Comments to this Manuals