4-24 Chapter 4: BIOS setup
V00.00(C)Copyright1985-2004,AmericanMegatrends,Inc.
BIOS SETUP UTILITY
Advanced
PCI/PnPConguration
ResetESCDData [No]
Plug&PlayO/S [No]
PaletteSnooping [Disabled]
OnBoardPCIELANBootROM [Enabled]
→← Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 SaveandExit
ESC Exit
4.4.3 PCI PnP
The PCI PnP menu items allow you to change the advanced settings for
PCI/PnP devices. The menu includes setting IRQ and DMA channel resources
for either PCI/PnP or legacy ISA devices, and setting the memory size block
for legacy ISA devices.
Take caution when changing the settings of the PCI PnP menu items.
Incorrect eld values can cause the system to malfunction.
Reset ESCD Data [No]
Clears the non-volatile RAM (NVRAM) during boot.
Conguration options: [No] [Yes]
Plug And Play O/S [No]
When set to [No], BIOS congures all the devices in the system. When set
to [Yes] and if you install a Plug and Play operating system, the operating
system congures the Plug and Play devices not required for boot.
Conguration options: [No] [Yes]
Palette Snooping [Disabled]
When set to [Enabled], the pallete snooping feature informs the PCI
devices that an ISA graphics device is installed in the system so that the
latter can function correctly. Conguration options: [Disabled] [Enabled]
OnBoard PCIE LAN Boot ROM [Enabled]
Allows you to enable or disable the option ROM in the onboard PCI Express
LAN controller. Conguration options: [Disabled] [Enabled]
Comments to this Manuals