Asus PRL-DLS User Manual download pdf (Page 118)

5-14

Chapter 5: OS Installation

C. NetWare 5.X New Installations

D. NetWare 4.XX New Installations

1. Begin the file server installation according to the instructions in the file

server installation chapter in the Novell NetWare Installation Manual.

2. When the NetWare installation procedure prompts you for a driver

disk, insert the LSI driver for NetWare diskette into drive A: Then use

the INS key to select an unlisted driver. A dialog box appears. If the

driver disk is in the A: drive, press Enter to continue. The

LSI_U3NW.HAM driver appears as a selection.

3. Highlight Disk and CD-ROM Drivers (e.g., IDEATA). Press Enter and

load an additional driver. Then press the INS key. The system always

defaults to the A: path. Highlight the HAM driver and press Enter.

Select Yes to save and move the driver into the operating system.

Press Enter, the system will start to copy the files.

4. Load a separate instance of the driver for every LSI SCSI controller

channel or host adapter present in the system. Load the LSI SCSI

driver twice with different slot number from STARTUP.NCF file as

follows:

load LSI_U3NW.HAM Slot=10009

load LSI_U3NW.HAM Slot=10010

5. When prompted for a slot number, accept the slot numbers displayed.

Make sure to write these slot numbers down for future reference.

6. When asked to edit the STARTUP.NCF file, make sure the

LSI_U3NW.HAM is loaded once for each LSI controller SCSI channel

present in the system. Add the statement SLOT=<slot number> to

each load line in the STARTUP.NCF, by specifying the slot numbers

written down in step 5 above, with only one slot number per load

instance.

Visit the Novell website (www.novell.com) for information on Netware

5.X support.

B. NetWare 6.X New Installations

Novell NetWare can automatically detect NetWare 6.X.

1 ... 117 118 119 ... 136

No comments

Asus PRL-DLS User Manual Page 118