ASUS PRL-DLS motherboard user guide
2-23
PRL-DLS
®
PRL-DLS 12-Volt Cooling Fan Power
FAN1
GND
Rotation
+12V
FAN2 FAN
GND
Rotation
+12V
GND
Rotation
+12V
6. CPU, Chassis, and Power Fan Connectors
(3-pin FAN1, FAN2, FAN3, FAN4)
The fan connectors support cooling fans of 350mA~740mA (8.88W
max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan
cables to the fan connectors on the motherboard, making sure that the
black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Lack of
sufficient air flow within the system may damage the motherboard
components. These are not jumpers! DO NOT place jumper caps on
the fan connectors!
7. Wake-On-Ring Connector (2-pin J2)
This connector connects to internal modem cards with a Wake-On-
Ring output. The connector powers up the system when a ringup
packet or signal is received through the internal modem card.
For external modems, Wake-On-Ring is detected through the COM
port.
PRL-DLS
®
PRL-DLS Wake on Ring Header
J2
Comments to this Manuals