Asus PRL-DLS User Manual download pdf (Page 134)

5-30

Chapter 5: OS Installation

5.7.2 Intel

LAN Driver Installation

SCO UnixWare 7.1.1 system can correctly recognize Intel network

controller during installation. User doesn’t need to load or modify the

network driver for the onboard LAN device.

You can find the Intel Network driver from support CD at:

\Drivers\Lan\UNIX\UW7DDI8

It is not necessary, nor recommended, to remove previous versions of this

package from the system before installing this updated version. To install

this package, you may use the

scoadmin Application Installer from the

desktop, or as a root login with

pkgadd command.

1. Copy the

eeE8.pkg file into any directory on the UnixWare system,

such as in the

/tmp directory.

2. Make sure no other users are logged on and all user applications are

closed.

3. If there is an older version of the

eeE driver on the system, first run

‘

netcfg’ and remove any configured NICs. Exit ‘netcfg’. Remove the

old driver by typing ‘

pkgrm eeE’. (You can find the driver version by

typing ‘

pkginfo -l eeE’).

4. Install the new driver using ‘pkgadd’. For example:

# pkgadd -d /tmp/eeE8.pkg

5. Run ‘netcfg’ to add and configure the NICs.

6. Reboot the system.

If you require Hot Plug PCI capabilities, the DDI 8 eeE8 driver must be

used. The DDI 8 driver is supported on UnixWare 7.1.0 and later

versions. For more information about Hot Plug PCI capabilities please

refer to SCO UnixWare 7 documentation.

5.7.3 ATI

Rage XL Display Driver Installation

SCO UnixWare 7.1.1 system can correctly recognize ATI Rage XL graphic

controller (ATI MACH64) during installation. User doesn’t need to load or

modify the video driver for the onboard VGA device.

1 ... 133 134 135 136

No comments

Asus PRL-DLS User Manual Page 134