Asus P7H55/USB3 User Manual download pdf (Page 28)

1-16 Chapter 1: Product introduction

1.4.4 Removing a DIMM

1. Simultaneously press the retaining

clips outward to unlock the DIMM.

2. Remove the DIMM from the socket.

1.4.3 Installing a DIMM

3. Hold the DIMM by both of its ends,

then insert the DIMM vertically into

the socket. Apply force to both ends

of the DIMM simultaneously until the

retaining clips snap back into place,

and the DIMM cannot be pushed in

any further to ensure proper sitting of

the DIMM.

Ensure to unplug the power supply before adding or removing DIMMs or other system

components. Failure to do so may cause severe damage to both the motherboard and the

components.

1. Unlock a DIMM socket by pressing

the retaining clips outward.

2. Align a DIMM on the socket such that

the notch on the DIMM matches the

DIMM slot key on the socket.

A DIMM is keyed with a notch so that it ts in only one direction. DO NOT force a DIMM into

a socket in the wrong direction to avoid damaging the DIMM.

Support the DIMM lightly with your ngers when pressing the retaining clips. The DIMM

might get damaged when it ips out with extra force.

Always insert the DIMM into the socket VERTICALLY to prevent DIMM notch damage.

Unlocked retaining clip

DIMM notch

DIMM slot key

Locked Retaining Clip

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 69 70

No comments

Asus P7H55/USB3 User Manual Page 28