Asus Striker II Extreme User Manual download pdf (Page 45)

ROG Striker II Extreme / Striker II NSE 2-19

2.4.2 Memory congurations

You may install 512 MB, 1 GB, and 2 GB unbuffered non-ECC DDR3 DIMMs into

the DIMM sockets.

Recommended Memory Congurations

 





mapped for single-channel operation.

• Always install DIMMs with the same CAS latency. For optimum compatibility,

it is recommended that you obtain memory modules from the same vendor.

 

than 3GB because the address space is reserved for other critical functions.

This limitation appears on Windows

XP/Vista 32-bit operation system which

does not support Physical Address Extension (PAE).

• If you install Windows

XP/Vista 32-bit operation system, a total memory of

less than 3GB is recommended.

• Due to chipset resource allocation, the system may detect less than 8 GB

system memory when you installed four 2 GB DDR3 memory modules.

Notes on memory limitations

• Due to chipset limitation, this motherboard can only support up to 8 GB on

the operating systems listed below. You may install a maximum of 2 GB

DIMMs on each slot.

Mode

Sockets

DIMM_A1 DIMM_A2 DIMM_B1 DIMM_B2

Single-Channel

Populated – – –

– – Populated –

Dual-channel (1)

Populated – Populated –

Dual-channel (2)

Populated Populated Populated Populated

64-bit

Windows

XP Professional x64 Edition

Windows

Vista x64 Edition

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 195 196

No comments

Asus Striker II Extreme User Manual Page 45