Asus ASMB6-iKVM User Manual download pdf (Page 64)

4-2 Chapter 4: Web-based user interface

4.1 Web-based user interface

The web-based user interface allows you to easily monitor the remote server’s

hardware information including temperatures, fan rotations, voltages, and power.

This application also lets you instantly power on/off or reset the remote server.

To enter the Web-based user interface:

1. Enter the BIOS Setup during POST.

2. Go to the

Advanced Menu > Runtime Error Logging > CPU II0 Bridge

Conguration > Launch Storage OpROM, then press <Enter>.

3. Set

Launch Storage OpROM to [Enabled].

4. Go to the Server

Mgmt Menu > BMC network conguration >

Conguration Address source, then press <Enter>.

5. Enter the

IP Address in BMC, Subnet Mask in BMC and Gateway

Address in BMC.

6. Press <F10> to save your changes and exit the BIOS Setup.

You should install JRE on remote console rst before using web-based

management. You can nd JRE from the folder JAVA of the ASMB6-iKVM

support CD. You can also download JRE from http://java.sun.com/javase/

downloads.

4.1.1 Loging in the utility

1. Ensure that the LAN cable of the computer is connected to the LAN port of

the remote server.

2. Open the web browser and type in the same IP address as the one in the

remote server.

3. The below screen appears. Enter the default user name (admin) and

password (admin). Then click Login.

1 ... 63 64 65 ... 114

No comments

Asus ASMB6-iKVM User Manual Page 64