Asus RS160-E4/PA4 User Manual download pdf (Page 109)

ASUS RS160-E4/PA4 5-39

2. In the

Enter Current Password

eld, type in your current password. Press

<Enter>.

3. The cursor moves to the next eld,

Enter New Password

Press <Enter>. Do not type anything in this eld.

4. The cursor moves to the next eld,

ConrmNewPassword

Press <Enter>. Do not type anything in this eld.

5. When the conrmation message “Password has been changed” appears,

press <Enter>.

The display returns to the Security menu. Note that the password eld on top

is changed to

Clear

A note about passwords

The Supervisor password is required to enter the BIOS Setup program

preventing unauthorized access. The User password is required to boot the

system preventing unauthorized use.

Forgot your password?

If you forget your password, you can clear it by erasing the CMOS Real Time

Clock (RTC) RAM. The RAM data containing the password information is

RAM, refer to section

4.3 Jumpers

for instructions.

Password Check [Setup]

This eld requires you to enter the password before entering the BIOS setup or the

system. Select [Setup] to require the password before entering the BIOS Setup.

Select [System] to require the password before entering the system.

Conguration options: [Setup] [Always]

Password Lock Mode [Enabled]

When set to [Enabled], the keyboard is locked and the user has no privilege to

launch the BIOS setup utility when installing adapter cards during option ROM

initialization. Conguration options: [Disabled] [Enabled]

Removable Device Boot [Enabled]

Allows you to enable or disable booting from a legacy oppy, USB oppy, or IDE

optical drive. Conguration options: [Disabled] [Enabled]

Flash Write [Enabled]

Set this item to [Disabled] to write-protect the BIOS ash memory.

Conguration options: [Disabled] [Enabled]

1 ... 108 109 110 ... 186

No comments

Asus RS160-E4/PA4 User Manual Page 109