6. Select
RAID
from the
Logical Drive
menu, then press <Enter>.
7. Select the
RAID
level from the menu, then press <Enter>.
You need at least two identical hard disk drives when creating a RAID 1 set.
8. When creating a RAID 1 set, select
DWC
from the
Logical Drive
menu, then
press <Enter>.
When creating a
RAID 0 set, proceed to step 10.
9. Select
On
to enable the
Disk Write Cache
setting, then press <Enter>.
Enabling DWC can improve the performance, but with the risk of data loss.
Comments to this Manuals