Asus WL-160G User Manual download pdf (Page 31)

3. Software

ASUS 802.11g Access Point 31

Chapter 3 - Software Configuration

Access Point

You can setup your wireless environment as shown in this figure:

Remote Bridge List

MAC Address

Enter the MAC address of the target ASUS 802.11g AP in order to designate

which ASUS 802.11g AP will be the partner for this ASUS 802.11g AP.

Note: The content in braces “( )” is the MAC address in the Remote

Bridge List of the AP. For example, WB1 have the MAC address of

WB in its Remote Bridge List.

In this case, there are six ASUS 802.11g APs and they are linked as wireless

bridges. Take one of them, named WB, as an example. WB is not in “AP

Only” mode and “Connect to APs in Remote Bridge List” is set as “Yes”,

so it can connect to WB3. Meanwhile, “allow anonymous” is set as “Yes”

or “Allow anonymous” is set as “No” but it has the MAC addresses of

WB1, WB2, and WB4 in the “Remote Bridge List”, so it can be connected

by WB1, WB2, and WB4.

1 ... 30 31 32 ... 77

No comments

Asus WL-160G User Manual Page 31