Asus WL-160G User Manual download pdf (Page 39)

3. Software

ASUS 802.11g Access Point 39

Chapter 3 - Software Configuration

Home Gateway

To set up your wireless interface,

you must first give it an SSID

(Service Set Identifier). The SSID

is a unique identifier attached to

packets sent over WLANs. This

identifier emulates a password

when a wireless device attempts

communication on the WLAN.

Because an SSID distinguishes

WLANs from each other, access

points and wireless devices trying

to connect to a WLAN must use the

same SSID.

Also, if you want to protect transmitted data, select a middle or high Security

Level.

Medium: Only allows those users with the same WEP key to connect to

this access point and to transmit data using 64-bit WEP or 128-bit WEP

encryption.

High: Only allows those users with the same WPA pre-shared key to connect

to this access point and to transmit data using TKIP encryption.

Click Finish to continue. You are prompted to save the settings. Click

Save&Restart to save the settings to the ASUS 802.11g AP and enable the

new settings.

Home Gateway Mode (Cont.)

1 ... 38 39 40 ... 77

No comments

Asus WL-160G User Manual Page 39