Asus P5LD-MR User Manual download pdf (Page 111)

ASUS P5LD-MR 5-13

4. Exit the RAID conguration utility and reboot the system.

5. Select

Start > Programs > Intel Matrix Storage > Intel Matrix Storage

Console or click the Intel Matrix Storage Manager tray icon to load the

Intel Matrix Stroage Manager utility.

6. From the

View menu, select Advanced Mode to display the details of the

Intel Matrix Storage Console.

7. From the

Volumes view option, select RAID volume to view the rebuilding

status. When nished, the status is changed to “Normal”.

Rebuilding the RAID with a new hard disk

If any of the SATA hard disk drives included in the RAID array failed, the system

displays the status of the RAID volume as “Degraded” during POST. You may

replace the disk drive and rebuild the RAID array.

To rebuild the RAID with a new hard disk:

1. Remove the failed SATA hard disk and install a new SATA hard disk of

the same specication into the same SATA Port.

5.2.9 Setting the Boot array in the BIOS Setup

Utility

You can set the boot priority sequence in the BIOS for your RAID arrays when

creating multi-RAID using the Intel

Matrix Storage Manager.

2. Reboot the system and then follow the steps in section

“Rebuilding the

RAID with other non-RAID disk” on page 5-12.

Select a destination disk with the same size as the original hard disk.

To set the boot array in the BIOS:

1. Reboot the system and press <Del> to enter the BIOS setup utility during

POST.

2. Go to the

Boot menu and select the option Boot Device Priority.

3. Use up/down arrow keys to select the boot priority and press <Enter>.

Refer to “4.6.1 Boot Device Priority” for details.

4. From the

Exit menu, select Exit & Save Changes, then press <Enter>.

5. When the confirmation window appears, select

OK, then press

<Enter>.

Set at least one of the arrays bootable to boot from the hard disk.

1 ... 110 111 112 ... 160

No comments

Asus P5LD-MR User Manual Page 111