4-28 Chapter 4: BIOS setup
OnboardLan Wakeup [Disabled]
Allows you to enable or disable the onboard LAN to turn on the system.
Conguration options: [Disabled] [Enabled]
Keyboard Wakeup Password
This item appears only when the Power On By PS/2 Keyboard is set to
Enabled. Select this item to set or change the keyboard wakeup password.
The Keyboard Wakeup Password item that appears below shows the default
Not Installed. After you have set a password, this item shows Installed.
4.5.3 Hardware Monitor
CPU Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the
motherboard, CPU, and ambient temperatures. Select [Ignored] if you do
not wish to display the detected temperatures.
Use the arrow down key to display additional items.
VBAT Voltage [ 3.120V]
12V Voltage [12.053V]
Hardware Monitor
CPU Temperature [49ºC/120ºF]
MB Temperature [47ºC/114ºF]
CPU Fan1 Speed [3884RPM]
CPU Fan2 Speed [N/A]
Front Fan1 Speed [N/A]
Front Fan2 Speed [N/A]
Rear Fan1 Speed [N/A]
Rear Fan2 Speed [N/A]
Smart Fan Control [Enabled]
CPU Target Temperature [060]
MB Target Temperature [050]
VCORE Voltage [ 1.320V]
3.3V Voltage [ 3.345V]
5V Voltage [ 5.094V]
5VSB Voltage [ 4.980V]
CPU1 Temperature
Comments to this Manuals