ASUS P5LD-MR 5-15
5.3.1 Creating a RAID set
The LSI Logic Embedded SATA RAID Setup Utility allows you to create a
RAID 0 or RAID 1 set using two types of congurations: Easy and New.
In Easy Conguration, the logical drive parameters are set automatically
including the size and stripe size (RAID 1 only).
In New Conguration, you manually set the logical drive parameters and
assign the set size and stripe size (RAID 1 only).
3. The utility main window appears. Use the arrow keys to select an
option from the Management Menu, then press <Enter>. Refer to the
Management Menu descriptions below.
At the bottom of the screen is the legend box. The keys on the
legend box allow you to navigate through the setup menu options or
execute commands. The keys on the legend box vary according to the
menu level.
Menu D esc rip tio n
Congure Allows you to create RAID 0, RAID 1, or RAID 10 set using the Easy
Conguration or the New Conguration command. This menu also
allows you to view, add, or clear RAID congurations or select the
boot drive
Initialize Allows you to initialize the logical drives of a created RAID set
Objects Allows you to initialize logical drives or change the logical drive
parameters
Rebuild Allows you to rebuild failed drives
Check Consistency Allows you to check the data consistency of the logical drives of a
created RAID set
Comments to this Manuals