Asus CUR-DLSR User Manual download pdf (Page 30)

D1260 CUR-DLSR User’s Manual

3. HARDWARE SETUP

Motherboard Settings

3. H/W SETUP

10) Wake-On-LAN Connector (3-pin WOL_CON)

This connector connects to a LAN card with a Wake-On-LAN output, such as the

PCI-L101 Ethernet card (see 7. APPENDIX). The connector powers up

the system when a wakeup packet or signal is received through the LAN card.

IMPORTANT: This feature requires that Wake On LAN is enabled (see 4.5.1

Power Up Control) and that your system has an ATX power supply with at least

720mA +5V standby power.

11) Wake-On-Ring Connector (2-pin WOR)

This connector connects to internal modem cards with a Wake-On-Ring output.

The connector powers up the system when a ringup packet or signal is received

through the internal modem card. NOTE: For external modems, Wake-On-Ring

is detected through the COM port.

IMPORTANT: This feature requires that PCI Modem card is enabled (see

4.5.1 Power Up Control) and that your system has an ATX power supply with at

least 720mA +5V standby power.

CUR-DLSR Wake-On-LAN Connector

IMPORTANT: Requires an ATX power

supply with at least 720mA +5 volt

standby power

+5 Volt Standby PME

Ground

WOL_CON

CUR-DLSR

CUR-DLSR Wake-On-Ring Connector

WOR

Ring#Ground

CUR-DLSR

1 ... 29 30 31 ... 68

No comments

Asus CUR-DLSR User Manual Page 30