Asus CUR-DLSR User Manual download pdf (Page 58)

4. BIOS SETUP

52 D1260 CUR-DLSR User's Manual

Onboard SCSI BIOS [Auto]

[Auto] allows the motherboard’s BIOS to detect whether you have a Symbios SCSI controller. If the

Symbios SCSI controller is detected, the motherboard’s Symbios BIOS will be enabled; if no

Symbios SCSI controller is detected, the onboard Symbios SCSI BIOS will be disabled. [Disabled]

will disable the motherboard’s Symbios SCSI BIOS so that the BIOS on an add-on Symbios SCSI

card can be used. If your Symbios SCSI card does not have a BIOS, the Symbios SCSI card will not

function. Configuration options: [Auto] [Disabled]

ONB SCSI BIOS First [No]

This field allows giving priority to the onboard SCSI BIOS for SCSI functions over other SCSI

controllers. Configuration options: [No] [Yes]

ONB Primary SCSI Term, ONB Secondary SCSI Term [Enabled]

These fields allow you to enable or disable the onboard SCSI termination on the primary and

secondary SCSI channels. Configuration options: [Enabled] [Disabled]

ONB VGA BIOS First [No]

This field, when set to [Yes], gives priority to the onboard VGA BIOS over other VGA controllers.

Configuration options: [No] [Yes]

Onboard LAN Boot ROM [Disabled]

When set to [Enabled], this field allows your computer to boot from the network using the onboard

LAN controller boot ROM. Configuration options: [Disabled] [Enabled]

1 ... 57 58 59 ... 68

No comments

Asus CUR-DLSR User Manual Page 58