Asus TR-DL User Manual download pdf (Page 100)

100

ASUS TR-DLS User’s Manual

5. OS Driver Installation

5. Driver Installation

III. ATI Rage XL Display Driver Installation

SCO OpenServer 5.0.6 system can correctly recognize ATI Rage XL graphic

controller (ATI MACH64) during installation. User doesn’t need to load or modify

the video driver for the onboard VGA device.

5.7 SCO UnixWare Server

I. LSI SCSI Driver Installation

A. Building the SCO UnixWare C8XX BTLD Diskette

To create a C8XX BTLD diskette to use with UnixWare 2.1.X or UnixWare 7, copy

the raw dd image file onto a 1.44 Mbytes floppy diskette. This process is dependent

upon the operating system that you are using to create this diskette. See the instructions

below for UNIX System and DOS System Users. After the driver diskette been

created, labeled as “PCI SCSI SCO UnixWare driver”.

For UNIX System Users:

Follow these steps to create the BTLD diskette:

1. Insert a 3.5" diskette into the floppy diskette drive.

2. At the UNIX prompt, type:

dd if=/<path>/unixware.dd of=/dev/rfd0

The <path> is where the dd image is located. For UnixWare 2.1.X, the dd

image file is located here:

\Drivers\Sdms\Drivers\UNIXES\UNIXWARE\UW21X\UNIXWARE.DD

For UnixWare 7, the dd image file is located here:

\Drivers\Sdms\Drivers\UNIXES\UNIXWARE\UW7 \UNIXWARE.DD

SCO UnixWare Server

1 ... 99 100 101 102 103 104

No comments

Asus TR-DL User Manual Page 100