Asus TR-DL User Manual download pdf (Page 26)

26 ASUS TR-DLS User’s Manual

3. HARDWARE SETUP

CPU Installation

3. H/W SETUP

3.6.1 Installing the CPU and Terminator

Follow these steps to install a CPU.

1. Locate the ZIF socket on the motherboard.

2. Unlock the socket by pressing the lever

sideways then lifting it up to a 90°-100°

angle.

3. Position the CPU above the socket such

that its notched or marked corner matches

the socket corner near the end of the lever,

while making sure that the CPU is parallel

to the socket.

4. Carefully insert the CPU into the socket

until it fits in place.

CAUTION! The CPU fits only in one orientation. Do not force the CPU into the

socket to prevent bending the pins and damaging the CPU. If the CPU does not

fit completely, check its orientation or check for bent pins.

5. When the CPU is in place, press it firmly on the socket while you push down the

socket lever to secure the CPU. The lever clicks on the socket indicating that it

is locked.

6. Install a CPU heatsink. Refer to the documentation that came with the heatsink.

7. Install the CPU terminator the same way

as you would install a CPU. The figure on

the right shows an installed CPU

terminator.

CAUTION! DO NOT install a heatsink on the terminator! It will cause system

damage!

1 ... 25 26 27 ... 104

No comments

Asus TR-DL User Manual Page 26