Asus TR-DL User Manual download pdf (Page 37)

3. HARDWARE SETUP

ASUS TR-DLS User’s Manual

3. H/W SETUP

Connectors

12) ASMC Connector (50-pin eRMC )

This connector allows you to connect the optional ASMC-LE or ASMC-ME

card using an ASMC interface cable. Install the ASMC card into the PCI6 slot

and connect the cable from the card to this connector. The PCI6 slot on the

motherboard has a Low Pin Count (LPC) signal connector to accommodate the

ASMC card.

11) ATX Power Connector (20/24-pin block ATXPWR)

This connector is for an ATX power supply with 20/24-pin power connector. The

connector from the power supply is designed to fit this connector in only one

orientation. Find the proper orientation and push down firmly until the plug

completely fits in.

TR-DLS

TR-DLS ASMC Connector

TR-DLS

TR-DLS ATX Power Connector

+3 Volts

Ground

+5 Volts

Ground

Power OK

+5V Standby

+12 Volts

-5 Volts

+5 Volts

+3 Volts

-12 Volts

Ground

PSON#

Ground

+5 Volts

+12 Volts

+3 Volts

+5 Volts

Ground

For Power Supply

with 20-pin

Power Connector

24-pin Power Connector

IMPORTANT: Make sure that your ATX power supply can supply at least 720mA

on the +5-volt standby lead (+5VSB). The system may become unstable and

may experience difficulty powering up if the power supply is inadequate.

It is recommended that you purchase a power supply with 24-pin power connector.

1 ... 36 37 38 ... 104

Comments to this Manuals

No comments

Asus TR-DL User Manual Page 37

Comments to this Manuals

Related products and manuals for Computer hardware Asus TR-DL