Asus TR-DL User Manual download pdf (Page 36)

3. HARDWARE SETUP

ASUS TR-DLS User’s Manual

3. H/W SETUP

Connectors

9) SMBus Connector (6-1 pin SMB, BPSMB)

These connectors allow you to connect SMBus (System Management Bus)

devices. SMBus devices communicate by means of the SMBus with an SMBus

host and/or other SMBus devices. SMBus is a specific implementation of an I

bus, which is a multi-device bus; that is, multiple chips can be connected to the

same bus and each one can act as a master by initiating data transfer.

The BPSMB connector is for a backplane board that supports an SMBus interface.

TR-DLS

TR-DLS USB Header

USBPORT

USB Power

USBP2–

USBP2+

GND

USB Power

USBP3–

USBP3+

GND

10) USB Header (10-1 pin USBPORT)

If the USB ports at the back panel are inadequate, one USB header is available

for two additional USB port connectors. Connect the USB header to a 2-port

USB connector set and mount the bracket to an open slot in the chassis.

TR-DLS

TR-DLS SMBus Connectors

SMB

SMBCLK

Ground

SMBDATA

+5V

FLOATING

BPSMB

SMBCLK

Ground

SMBDATA

+5V

FLOATING

1 ... 35 36 37 ... 104

No comments

Asus TR-DL User Manual Page 36