Asus TR-DL User Manual download pdf (Page 23)

ASUS TR-DLS User’s Manual 23

3. HARDWARE SETUP

System Memory

3. H/W SETUP

3.5 System Memory

This motherboard uses only Dual Inline Memory Modules (DIMMs). Four DIMM

sockets are available for 3.3Volt (power level) registered Synchronous Dynamic

Random Access Memory (SDRAM) of 16MB, 32MB, 64MB, 128MB, 256MB,

512MB, or 1GB densities with Serial Presence Detect (SPD) and Error Check and

Correction (ECC). The motherboard supports a memory configuration of up to 4GB.

One side (with memory chips) of the DIMM takes up one row on the motherboard.

3.5.1 Memory Configurations

Install memory in any of the following combinations:

DIMM Location 168-pin DIMM Total Memory

Socket 0 (Rows 0&1) SDRAM 128MB, 256MB, 512MB, 1GB x1

Socket 1 (Rows 2&3) SDRAM 128MB, 256MB, 512MB, 1GB x1

Socket 2 (Rows 4&5) SDRAM 128MB, 256MB, 512MB, 1GB x1

Socket 3 (Rows 6&7) SDRAM 128MB, 256MB, 512MB, 1GB x1

Total System Memory (Max. 4GB) =

IMPORTANT: The system chipset only supports 64Mbit, 128Mbit, and 256Mbit

“registered” SDRAMs with ECC. Make sure to use the specified DIMM types for

smooth system operation.

1 ... 22 23 24 ... 104

No comments

Asus TR-DL User Manual Page 23