Asus TR-DL User Manual download pdf (Page 58)

ASUS TR-DLS User’s Manual58

4. BIOS SETUP

4.4.3 PCI Configuration

PCI Configuration

ECP DMA Select [3]

This field allows you to configure the parallel port DMA channel for the selected ECP

mode. This selection is available only if you select [ECP] or [ECP+EPP] in Parallel

Port Mode above. Configuration options: [1] [3]

Slot 1, Slot 2, Slot 3, Slot 4, Slot 5, Slot 6 IRQ [Auto]

These fields set how IRQ use is determined for each PCI slot. The default setting

for each field is [Auto], which utilizes auto-routing to determine IRQ use.

Configuration options: [Auto] [NA] [3] [4] [5] [7] [9] [10] [11] [12] [14] [15]

PCI/VGA Palette Snoop [Disabled]

Some non-standard VGA cards, like graphics accelerators or MPEG video cards,

may not show colors properly. Setting this field to [Enabled] corrects this problem.

If you are using standard VGA cards, leave this field to the default setting [Disabled].

Configuration options: [Disabled] [Enabled]

PCI Latency Timer [32]

Leave on default setting for best performance vs. stability.

1 ... 57 58 59 ... 104

No comments

Asus TR-DL User Manual Page 58