Asus TR-DL User Manual download pdf (Page 34)

3. HARDWARE SETUP

ASUS TR-DLS User’s Manual

3. H/W SETUP

Connectors

6) Two 68-pin Ultra160/320 SCSI Connectors (SCSI-A, SCSI-B)

This motherboard has two 68-Pin Ultra160/320 SCSI connectors; one for each

of the two channels. Each channel can support a maximum of 15 devices as

specified by Ultra160 standards.

SCSI Connection Notes

This motherboard has two 68-Pin Ultra160 SCSI connectors; one for each of the

two channels.

The onboard SCSI chipset incorporates an advanced multimode I/O cell that supports

both single-ended (SE), Ultra2, and Ultra160/320 devices. With Ultra160/320 devices,

the SCSI bus platform performs at full Ultra160/320 speeds (up to 160MB/sec or

320MB/s) and extended cabling 12m (or 25m in a point-to-point configuration).

When an SE device is attached, the bus defaults to an SE speed and 1.5m cable

length.

NOTE: Ultra160/320 SCSI devices do not have termination jumpers and

must use a separate terminator on the last connector (internal) or device

(external).

TR-DLS

TR-DLS Onboard SCSI Connectors

3568

34 1

6834

SCSI-A

68-Pin Ultra160/

Ultra2-Wide SCSI Connector

SCSI-B

68-Pin Ultra160/

Ultra2-Wide SCSI Connector

TR-DLS

TR-DLS SCSI Connection Example

68-pin Internal SCSI Cable (Twisted-Pair Ribbon)

68-pin Female

Terminator

Internal SCSI Devices (up to 15 devices)

Channel A

68-pin Internal SCSI Cable (Twisted-Pair Ribbon)

68-pin Female

Terminator

Internal SCSI Devices (up to 15 devices)

Channel B

IMPORTANT: Connect SCSI devices as shown. Each channel should have

only one type of SCSI standard (e.g. Ultra160/320, Ultra2, Ultra-Wide). Mixing

SCSI devices on the same channel decreases performance of the slower device.

1 ... 33 34 35 ... 104

Comments to this Manuals

No comments

Asus TR-DL User Manual Page 34

Comments to this Manuals

Related products and manuals for Computer hardware Asus TR-DL