Asus Terminator P-III User Manual download pdf (Page 22)

ASUS CUV4X-D User’s Manual

3. HARDWARE SETUP

3. H/W SETUP

System Memory

3.5.2 Memory Installation

WARNING! Make sure that you unplug the power supply when adding or

removing memory modules or other system components. Failure to do so may

cause severe damage to both the motherboard and expansion cards (see 3.3

Hardware Setup Procedure for more information).

Insert the module(s) into the DIMM sockets as shown. Because the number of pins

are different on either side of the breaks, the module only fits in one direction. SDRAM

DIMMs have different pin contacts on each side and have a higher pin density than

DRAM SIMMs.

The DIMMs must be 3.3Volt unbuffered SDRAMs. To determine the DIMM type,

check the notches on the DIMMs (see the figure below).

The notches on the DIMM shifts between left, center, or right to identify the type

and also to prevent the wrong type from being inserted into the DIMM slot on the

motherboard. You must tell your retailer the correct DIMM type before purchasing.

This motherboard supports four clock signals per DIMM.

CUV4X-D

CUV4X-D 168-Pin DIMM Sockets

Lock

20 Pins

60 Pins

88 Pins

1 ... 21 22 23 ... 92

No comments

Asus Terminator P-III User Manual Page 22