Asus Terminator P-III User Manual download pdf (Page 23)

ASUS CUV4X-D User’s Manual 23

3. HARDWARE SETUP

3.6 Central Processing Unit (CPU)

The motherboard comes with a ZIF Socket for the supported CPUs listed in section

2.1.1 Specifications. The following illustration shows the CPU socket location on

the motherboard and the correct CPU orientation.

CPU

3. H/W SETUP

Note in the illustration that CPUs have marks (usually a notch or a gold mark on one

corner) to help you identify the proper orientation and enable you to correctly install

a CPU. It is important that you match the marked corner of the CPU with the

corresponding corner on the socket so as not to damage the CPU pins.

The CPU picture above is for reference only. Usually, when you buy a CPU, the

heatsink and fan are already attached to the CPU. If a heatsink and fan did not come

with the package, make sure you obtain one before installing the CPU.

Proceed to the next section for the steps on how to properly install a CPU.

CAUTION! Be careful not to scrape the motherboard when mounting/unmounting

a clamp-style processor fan to avoid damaging the motherboard.

WARNING! You must install the proper heatsink and fan to the CPU. Failure to

do so will cause the CPU to overheat and may damage both the CPU and the

motherboard. Install an auxillary fan, if necessary.

CUV4X-D

CUV4X-D Socket 370

Gold Arrow

Pentium III

1 ... 22 23 24 ... 92

No comments

Asus Terminator P-III User Manual Page 23