Asus Terminator P-III User Manual download pdf (Page 66)

ASUS CUV4X-D User’s Manual66

4. BIOS SETUP

ISA MEM Block BASE [No/ICU]

This field allows you to set the base address and block size of a legacy ISA

card that uses a memory segment within the C800 and DFFF address range.

If you have such a card and you are not using ICU to specify its address

range, select a base address from the six available options.

When you select an option other than [No/ICU], the ISA MEM Block SIZE

field appears for selecting the block size. If there is more than one legacy

ISA card in the system that requires the use of this address range, you can

increase the block size to 8K, 16K, 32K, or 64K. If you are using ICU to

accomplish this task, leave ISA MEM Block BASE to its default setting

[No/ICU]. Configuration options: [No/ICU] [C800] [CC00] [D000] [D400]

[D800] [DC00]

Video ROM BIOS Shadow [Enabled]

When enabled, this field allows you to change the video BIOS location

from ROM to RAM. Relocating the video BIOS to RAM enhances system

performance because information access is faster than in ROM.

Configuration options: [Disabled] [Enabled]

C8000-DFFFF Shadow [Disabled]

These fields are used for shadowing other expansion card ROMs. If you

install any expansion card with a built-in ROM, you need to know which

addresses the ROM uses to specifically shadow them. Shadowing a ROM

reduces the memory available between 640K and 1024K by the amount

used for this purpose. Configuration options: [Disabled] [Enabled]

4.4.4 Shadow Configuration

PCI Configuration

1 ... 65 66 67 ... 92

No comments

Asus Terminator P-III User Manual Page 66