Asus Terminator P-III User Manual download pdf (Page 56)

ASUS CUV4X-D User’s Manual56

4. BIOS SETUP

Notes for JumperFree Mode

CPU Upgrade/Reinstallation

To ensure that the system can enter BIOS Setup after changing the processor,

the system starts up running at a bus speed of 66MHz and a fail-safe CPU

internal frequency (4x66MHz for the Intel Coppermine processor or

2x66MHz for non-Coppermine processors). Then it automatically takes you

to the Advanced menu with a popup menu of all the possible CPU internal

frequencies.

JumperFree Mode

For processors with locked frequency multiplier

USB Legacy Support [Auto]

This motherboard supports Universal Serial Bus (USB) devices. The default

of [Auto] allows the system to detect a USB device at startup. If detected,

the USB controller is enabled. If not detected, the USB controller is disabled.

When you set this field to [Disabled], the USB controller is disabled whether

you are using a USB device or not. Configuration options: [Disabled]

[Enabled] [Auto]

OS/2 Onboard Memory > 64M [Disabled]

When using OS/2 operating systems with installed DRAM of greater than

64MB, you need to set this option to [Enabled]. Otherwise, leave to the

default setting [Disabled]. Configuration options: [Disabled] [Enabled]

1 ... 55 56 57 ... 92

No comments

Asus Terminator P-III User Manual Page 56