Asus Terminator P-III User Manual download pdf (Page 33)

ASUS CUV4X-D User’s Manual 33

3. HARDWARE SETUP

Connectors

3. H/W SETUP

4) Wake-On-LAN Connector (3-pin WOL_CON)

This connector connects to a LAN card with a Wake-On-LAN output, such as

the ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up

the system when a wakeup packet or signal is received through the LAN card.

IMPORTANT: This feature requires that the Wake-On-LAN field is enabled

(see 4.5.1 Power Up Control) and that the system has an ATX power supply

with at least 720mA +5V standby power.

5) Wake-On-Ring Connector (2-pin WOR)

This connector connects to internal modem cards with a Wake-On-Ring output.

The connector powers up the system when a ringup packet or signal is received

through the internal modem card. NOTE: For external modems, Wake-On-Ring

is detected through the COM port.

CUV4X-D

CUV4X-D Wake-On-LAN Connector

IMPORTANT: Requires an ATX power

supply with at least 720mA +5 volt

standby power.

+5 Volt Standby

PME

Ground

WOL_CON

CUV4X-D Wake-On-Ring Connector

WOR

RI#Ground

CUV4X-D

1 ... 32 33 34 ... 92

No comments

Asus Terminator P-III User Manual Page 33