Asus TR-DLSR User Manual download pdf (Page 31)

3. HARDWARE SETUP

ASUS TR-DLSR User’s Manual

3. H/W SETUP

Connectors

4) Wake-On-LAN Connector (3-pin WOL_CON)

This connector connects to a LAN card with a Wake-On-LAN output, such as the

ASUS PCI-L101 Ethernet card (see 7. APPENDIX). The connector powers up

the system when a wakeup packet or signal is received through the LAN card.

IMPORTANT: This feature requires that Wake On LAN is enabled (see 4.5.1

Power Up Control) and that your system has an ATX power supply with at least

720mA +5V standby power.

5) Wake-On-Ring Connector (2-pin WOR)

This connector connects to internal modem cards with a Wake-On-Ring output.

The connector powers up the system when a ringup packet or signal is received

through the internal modem card. NOTE: For external modems, Wake-On-Ring

is detected through the COM port.

IMPORTANT: This feature requires that the Power Up on Modem Act parameter

is enabled (see 4.5.1 Power Up Control) and that the system has an ATX power

supply with at least 720mA +5V standby power.

TR-DLSR

TR-DLSR Wake-On-LAN Connector

IMPORTANT: Requires an ATX power

supply with at least 720mA +5 volt

standby power

+5 Volt Standby PME

Ground

WOL_CON

TR-DLSR

TR-DLSR Wake-On-Ring Connector

WOR

Ring#Ground

1 ... 30 31 32 ... 100

No comments

Asus TR-DLSR User Manual Page 31