Asus TR-DLSR User Manual download pdf (Page 36)

3. HARDWARE SETUP

ASUS TR-DLSR User’s Manual

3. H/W SETUP

Connectors

15) Power Button Connector (PWRBTN)

This connector allows you to turn the system ON or OFF. The power LED

lights up when the system is turned ON.

14) ATX Power Connector (20/24-pin block ATXPWR)

This connector connects to an ATX power supply. The plug from the power supply

fits in only one orientation because of the different hole sizes. Find the proper

orientation and push down firmly making sure that the pins are aligned.

IMPORTANT: Make sure that your ATX power supply can supply at least 720mA

on the +5-volt standby lead (+5VSB). You may experience difficulty in turning

ON your system if your power supply cannot support the load.

TR-DLSR

TR-DLSR ATX Power Connector

+3 Volts

Ground

+5 Volts

Ground

Power OK

+5V Standby

+12 Volts

-5 Volts

+5 Volts

+3 Volts

-12 Volts

Ground

PSON#

Ground

+5 Volts

+12 Volts

+3 Volts

+5 Volts

Ground

TR-DLSR

TR-DLSR Power Button Connector

GND

PWRBTN#

PWRBTN

1 ... 35 36 37 ... 100

No comments

Asus TR-DLSR User Manual Page 36