Asus TR-DLSR User Manual download pdf (Page 56)

ASUS TR-DLSR User’s Manual56

4. BIOS SETUP

4.4.3 PCI Configuration

PCI Configuration

ECP DMA Select [3]

This field allows you to configure the parallel port DMA channel for the selected ECP

mode. This selection is available only if you select [ECP] or [ECP+EPP] in Parallel

Port Mode above. Configuration options: [1] [3] [Disabled]

Slot 1, Slot 2, Slot 3 IRQ [Auto]

These fields set how IRQ use is determined for each PCI slot. The default

setting for each field is [Auto], which utilizes auto-routing to determine

IRQ use. Configuration options: [Auto] [NA] [3] [4] [5] [7] [9] [10] [11]

[12] [14] [15]

PCI Latency Timer [32]

Leave on default setting for best performance vs. stability.

Onboard SCSI BIOS [Auto]

[Auto] allows the motherboard’s BIOS to detect whether you have a Symbios

SCSI controller. If the Symbios SCSI controller is detected, the

motherboard’s Symbios BIOS will be enabled; if no Symbios SCSI controller

is detected, the onboard Symbios SCSI BIOS will be disabled.

[Disabled] will disable the motherboard’s Symbios SCSI BIOS so that the

BIOS on an add-on Symbios SCSI card can be used. If your Symbios SCSI

card does not have a BIOS, the Symbios SCSI card will not function.

Configuration options: [Auto] [Disabled]

1 ... 55 56 57 ... 100

No comments

Asus TR-DLSR User Manual Page 56