Asus P3C-D User Manual download pdf (Page 35)

ASUS P3C-L / P3C-S / P3C-LS User’s Manual 35

3. HARDWARE SETUP

CPU

3. H/W SETUP

3.6.5 Removing the Processor

SECC: Push the SECC’s two locks inward to disengage the latch feature and firmly

lift the SECC assembly out of the URM.

SECC2/SEPP:

URM (A): Unlock the URM by pushing the two locks down and then pull the

SECC2/SEPP assembly out.

URM (B): Place one hand on the heatsink and your other thumb on the top of one

of the URMs. Push the URM away from the assembly with your thumb while you

rotate the processor out of the slot 1 connector with the other.

CAUTION! You may wear gloves to protect your hands from the sharp edges

when removing SECC2/SEPP processors.

SECC2/SEPP

Push lock inward

CPU fan cable to

fan connector

CPU fan cable to

fan connector

3.6.6 Recommended Heatsinks for Slot 1 Processors

The recommended heatsinks for the Slot 1 processors are those with three-pin fans,

such as the ASUS Smart Fan, that can be connected to the motherboard’s CPU fan

connector. These heatsinks dissipate heat more efficiently and with an optional hard-

ware monitor, they can monitor the fan’s RPM and use the alert function with the

Intel LANDesk Client Manager (LDCM) or the ASUS PC Probe software.

SECC Heatsink & Fan SECC2 Heatsink & Fan

NOTE: The SEPP heatsink and fan (for Intel Celeron processors) is similar to the

SECC2 heatsink and fan except that the clamping design is different.

1 ... 34 35 36 ... 114

No comments

Asus P3C-D User Manual Page 35