Asus P3C-D User Manual download pdf (Page 32)

32 ASUS P3C-L / P3C-S / P3C-LS User’s Manual

3. HARDWARE SETUP

CPU

3. H/W SETUP

3.6.2 Attaching the Heatsink

NOTE: If provided, you should follow the heatsink attachment instructions that

came with your heatsink or processor. The following steps are provided only as a

general guide and may not reflect those for your heatsink.

1. Attach the heatsink to the processor core with a good quality thermal interface

material.

2. Mount the heatsink to the processor package.

Using SECC fan with Pentium

Push the two lock arms one direction to clamp the heatsink onto the processor

and the other direction to release.

Using SECC2 fan with Pentium

III

Insert the four heatsink’s pins through the holes of the SECC2. Place the metal

clip on the ends of the pins and slide until it locks into place.

NOTE: The SEPP heatsink and fan (for Intel Celeron processors) is similar to the

SECC2 heatsink and fan except that the clamping design is different.

WARNING! Make sure the heatsink is mounted tightly against the SECC2, SECC,

or SEPP; otherwise, the CPU will overheat. You may install an auxiliary fan to

provide adequate circulation across the processor’s passive heatsink.

Lock Arm

Four Pins and metal clip

1 ... 31 32 33 ... 114

No comments

Asus P3C-D User Manual Page 32