Asus P3C-D User Manual download pdf (Page 73)

ASUS P3C-L / P3C-S / P3C-LS User’s Manual 73

4. BIOS SETUP

PCI Configuration

Slot 1, Slot 2, Slot 3/5, Slot 4 IRQ [Auto]

These fields set how IRQ use is determined for each PCI slot. The default

setting for each field is [Auto], which uses auto-routing to determine IRQ use.

Configuration options: [Auto] [NA] [3] [4] [5] [7] [9] [10] [11] [12] [14] [15]

PCI/VGA Palette Snoop [Disabled]

Some nonstandard VGA cards, such as graphics accelerators or MPEG Video

Cards, may not show colors properly. The setting [Enabled] should correct

this problem. Otherwise, leave this on the default setting of [Disabled].

Configuration options: [Disabled] [Enabled]

PCI Latency Timer [32]

Leave on default setting for best performance vs. stability.

Onboard SCSI BIOS [Auto]

Set to [Auto] to enable the onboard SCSI BIOS.

ONB SCSI BIOS First [No]

This field allows giving priority to the onboard SCSI BIOS for SCSI func-

tions over other SCSI controllers.

ONB SCSI SE Term. [Auto]

This allows you to enable or disable the onboard termination for single-

ended (SE) devices, such as scanners, CD-ROMs, or tape drives.

4.4.3 PCI Configuration

1 ... 72 73 74 ... 114

No comments

Asus P3C-D User Manual Page 73