10Base-T Port
PC 1
Up-
DSLAM/NSP
PC 8
[ISP/DSLAM configuration]
IP address : 192.168.102.3
Subnet mask : 255.255.255.0
Gateway : None
[Local PC 1 configuration]
IP address : 202.1.136.101
Subnet mask : 255.255.255.0
Gateway : 202.1.136.254
[Local PC 8 configuration]
IP address : 202.1.136.108
Subnet mask : 255.255.255.0
Gateway : 202.1.136.254
The following command tell you how to adding a Network Address Translation protocol to the PPP over ATM(RFC2364)
configuration mentioned above. The following command must be added after the “ip device add …” commands
have been given and the Router restarted.
Enables NAT on a PPP over ATM (RFC2364)
> ip nat add ppp_device ↵
Enables NAT to PPP over ATM (RFC2364) in Routing mode
The ADSL modem can be setup to adding NAT protocol to a Routing Mode configuration like RFC1483, RFC 1577, RFC
2364 or RFC 2516 with following procedure. The following procedure must be typed after
ip device add
command
have been given and the ADSL Router restarted.
[System configuration]
- 22 -
Ethernet
10Base-T Port
192.16
PC 1
202.1.136.2
Up-
Comments to this Manuals