Asus AAM6000EV Specifications download pdf (Page 39)

# type dev file IP address

device ether ether //nice mtu 1500 192.168.2.1

device vlane ether //lane mtu 1500 192.168.55.1

DSL> ip device add loop loop 127.0.0.1

Change will have no effect until after config save and restart.

DSL> ip device delete vlane

Change will have no effect until after config save and restart.

DSL> ip device

# type dev file IP address

device ether ether //nice mtu 1500 192.168.2.1

device vlane ether //lane mtu 1500 192.168.55.1 # DELETED

device loop loop - mtu 2048 127.0.0.1 # ADDED

Additions/deletions will have no effect until after config save and restart.

13.5.4. disable

Syntax:

disable [<i/f>]

Description:

Disables all interfaces, or just a specified interface.

Example:

DSL> ip disable vlane

DSL> ip device

# type dev file IP address

device ether ether //nice mtu 1500 192.168.2.1

device vlane ether //lane mtu 1500 192.168.55.1 # DISABLED

13.5.5. enable

Syntax:

enable [<i/f> [mtu <size>] [<IP address>]]

Description:

Enables all interfaces, or just a specified interface. Can also be used to set the MTU and IP address on an interface when

enabling it (or change them on an interface that is already enabled); see the “device” command for details on these.

Configuration saving saves the MTU and IP addresses, but not the disabled/enabled state.

Example:

DSL> ip enable vlane 192.168.56.3

ip/vlane: IP address 192.168.56.3

DSL> ip device

# type dev file IP address

device ether ether //nice mtu 1500 192.168.2.1

device vlane ether //lane mtu 1500 192.168.56.3

- 39 -

1 ... 38 39 40 ... 69

No comments

Asus AAM6000EV Specifications Page 39