Asus AAM6000EV Specifications download pdf (Page 9)

DSLAM/ISP

Ethernet

Port

Serial

10Base-T Port

Console

Up-

Link

The LAN port on the SAR router is the type designed to be connected to an ‘uplink’ (or crossover) port on a hub. This

means you can also connect the router LAN port direct to the port on a PC LAN card using a standard cat5 LAN cable. If

you wish to connect the router to a ‘normal’ port on a hub then you will need to use a crossover cable or adapter.

Use the supplied RJ11 phone cable to connect from the ADSL socket on your router to your ADSL phone socket.

Connect the power jack from the power supply to the power socket on the router and then plug the power supply into a

suitable UK power socket: The amber POWER LED on the front of the router should light up.

Configuration can be carried out via Telnet (password is ‘password’ and default IP address of the router is 192.168.7.1) or

using a serial port link to the 9 pin console port on the rear of the router (port settings 9600,8,1,n,no flowcontrol). For

those users wanting a more involved configuration process configuration can be done using a command line interface via

telnet or a terminal application (e.g. Windows HyperTerminal) using. However, a more user friendly configuration method

is to use the Windows based software tool supplied on the CD which ‘talks’ to the router via the console port. A 9 pin to 9

pin serial cable is supplied for this purpose and needs to be connected from the Console port of the router to a suitable com

port on your PC.

2.2. Configuration Software

The configuration software must be run on an MS Windows PC. Insert the supplied software CD into your CD drive. Then

go to the ‘703’ directory and run the setup programme:

- 9 -

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 68 69

No comments

Asus AAM6000EV Specifications Page 9