Asus AAM6000EV Specifications download pdf (Page 35)

13.4.17. spanning port <number> priority

Syntax:

spanning port <number> priority [<portpriority>]

Description:

Reads or sets the priority of the port. The priority may be any value between 0 and 255. The priority is used in

conjunction with the pathcost to determine the best root to the root bridge. The higher the priority number, the less

significant, in protocol terms, the port. The port priority may also be changed by SNMP command.

Configuration saving saves this information. By default a port has a priority of 128.

Example:

DSL bridge> spanning port 1 priority ;

Displays the

priority for port 1

on the bridge

13.4.18. spanning priority

Syntax:

spanning priority [<bridgepriority>]

Description:

Reads or sets the priority of the bridge. The priority may be any value in the range 0 to 65535. The higher the priority

number, the less significant, in protocol terms, the bridge. Where two bridges have the same priority, their MAC address

is compared and the smaller MAC address is treated as more significant. The priority of the bridge may be changed by

SNMP command.

Configuration saving saves this information. By default the bridge is assigned a priority of 32768.

Example:

DSL bridge> spanning priority 4000 ;

Sets the bridge

priority to 4000.

13.4.19. spanning status

Syntax:

spanning status

Description:

Reports the status of the spanning tree. If spanning tree operation is disabled, a message is printed to that effect and no

other information is displayed. When spanning tree operation is enabled, the following information is displayed:

• The identifier of the bridge.

• The identifier of the root bridge.

• The root port for this bridge.

• The root path cost: how far the bridge is from the root

• The various spanning tree time values as defined by the current root bridge:

• The maximum age of spanning tree information before it is discarded: max age time.

• The amount of time between configuration protocol packets: hello time.

• The amount of time delay when ports are changing state: forward delay time.

• For each port:

• The identifier of the designated bridge

• The identifier of the designated port for the designated bridge

• The identifier of the designated root bridge

- 35 -

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 68 69

Comments to this Manuals

No comments

Asus AAM6000EV Specifications Page 35

Comments to this Manuals

Related products and manuals for Networking Asus AAM6000EV